Strong technological background
Environmentally friendly operation
Orders 24/7 - eshop
Mon-Fri 8:00-15:00
Digital printing
the possible printing speed on our selected printing technologies on which we want to print the material, while maintaining maximum print quality and consistency in full-colour areas without streaks and other dropouts. The required properties for print quality are determined by the required surface tension, porosity, texture, amount of added plasticizers (phthalates), bleaching agents, etc.We only use proven quality and branded printing materials. Before introducing a new print material into our print portfolio, we first test the material to the highest possible Orafol Logo If the material passes this first test and the technologies on which it will be printed have already been selected, we then always have the material colour calibrated - linearised with an ink limit and a suitable ICC profile measured for usually three print speeds from the highest quality mode to production mode. We only use these branded materials for our print production:
This transparent material is suitable for printing flags. It is printed by direct textile printing followed by sublimation heat fixation at 195 C. The material is characterised by its lightness and after printing the reverse side shows the face motif with approx. 90 % intensity. The weight is 110 g/m2. Printed by sublimation with subsequent fixation.
This transparent material is also suitable for printing flags. We print by direct textile printing with subsequent sublimation heat fixation at 195 C. The material is characterized by its lightness and perforations for easier air permeability and after printing, approximately 95% of the face motif is visible from the reverse side. The weight is 110 g/m2. It is B1 certified. We print by sublimation with subsequent fixation.
This elastic white material is suitable for printing banners and interior textile decorations. It is printed on sublimation paper and then transferred to calender. The material is characterised by its excellent colour and, thanks to the LYCRA additive, it is elastic and therefore suitable, for example, for switching out into more complex shapes. After printing, the motif is not visible from the reverse side, but it may shine through slightly, especially in darker shades. The material is therefore only suitable for one-sided visual application.
je jemný textilní materiál s uzavřenou povrchovou strukturou. Akrylátový nános poskytuje nízkou hmotnost a elasticitu tohoto reklamního banneru. Je vhodný pro shop design, na výstavní expozice, pro vypínání na velké rámové konstrukce, jako bezespárá stěna nebo na závěsné podhledy.
Textilní materiál se 100% obsahem polyesteru, vyznačuje se strukturou podobnou plátnu. Je ideální pro grafiku do závěsných systémů, POP displeje, obložení stěn nebo pro grafiku na výstavy. K dispozici je v šířích 320 a 505cm. Materiál je vhodný i pro prosvětlené aplikace při tisku s vyšším nasycením. Má certifikát nehořlavosti B1.
This is a textile with the advantage of double-sided printing. 100% polyester textile with a luxurious satin finish and black interlining suitable for balls, events, as a decoration for curtains, etc. The advantage is the non-translucent light. Fire resistant material, it has M1 and B1 certification. It is suitable for UV printing and is available up to 510cm wide. In combination with UV printing it is a completely environmentally friendly product.
100% polyester material with a weight of approx. 245g/m2, which is completely opaque thanks to the black back side and can be used wherever standard textile material would shine through. It is suitable for printing on UV printers. The material is available in widths of 155, 252, 310 and 510 cm.
Suitable for UV printing, available in a maximum width of 320 cm. It is most suitable for interior decoration, as a mat for company halls, waiting rooms, hallways, etc. Or simply if you have a lack of space for your advertising. For short-term purposes, it can also be displayed outdoors.
For digital UV printing and subsequent cutting we use Foamalite plates - it is a free foamed PVC - PVCP. It has a significantly lower weight and better mechanical workability compared to solid boards. The material is highly flammable, self-extinguishing.
Standard dimensions: 2000x1000 mm, 3050x1560 mm, 3050x2050 mm.
For digital UV printing and subsequent cutting of lightweight formats and shaped banners, we use lightweight KAPPA sandwich plates. KAPPA Line is a "paper-PUR-paper" sandwich KAPPA Plast is a "plastic-PUR-plastic" sandwich These base plates are available in the following sizes: 500 x 700, 1000 x 700, 1000 x 1400, 3000 x 1400, (3050 x 1530 and 3050 x 2050 - these only in thicknesses of 5 and 10 mm) Interesting are also KAPPA tex plates with a surface that imitates the pattern of canvas and KAPPA fix with an adhesive layer for laminating photo papers
We also use polypropylene cavity plates for UV printing and coating with cut graphics or printed and laminated foil, which have the advantage of low weight. The cavity (chamber) polypropylene is mainly intended for interiors, but can also be used for exteriors in the short term. It is characterised by its exceptional lightness and considerable toughness. It can be used for printing, cutting, bending.
The material is available in thicknesses of 3.0 - 10.0 mm
Dimensions: depending on type and weight 2000x3000 mm and 1000x1400 mm
For digital UV printing, laminated foil or plotter graphics, for stressed realizations or for long-term and shape-stable applications in the exterior we use Alubond boards. The material is a combination of a lightweight polyethylene core in thin aluminium plates. In proportion to its strength and dimensional stability, it is light in weight and has excellent weather resistance.
Standard dimensions: 2500x1250 mm, 3050x1500 mm.
Pevná polyesterová fólie pro pop up displeje. Stříbrná zadní strana slouží pro dodání luxusnějšího vzhledu a také 100% zabraňuje průniku světla. Má výjimečnou stabilitu, je odolný a byl antistaticky ošetřen pro bezproblémový tisk. Poskytuje výborné rozlišení barev. Dostupný v šíři maximálně 91 cm
It is a monomeric 3-4 year film in white or clear with a glossy or matt surface and a clear or grey permanent or semipermanent adhesive. The film is suitable for short and medium term exterior applications and long term interior applications. The UV stability of the colours and material when using solvent printing without lamination is 2 years outdoors. With lamination the durability increases to 3 years. For lamination it is easier to use 100μ. thickness and therefore we print exclusively on film of this thickness. The material is available in widths up to 160 cm
It is a monomeric 5-year film in white or clear with a glossy, semi-gloss or matt surface and a clear or grey permanent or semi-permanent adhesive. The film is suitable for medium-term exterior applications and long-term interior applications. The UV stability of the colours and material when using solvent printing without lamination is 2 years outdoors. With lamination the durability increases to 4 years. The film has a thickness of 70 μ. The material is available in widths up to 160 cm.
It is a polymeric 7-year film in white or clear with a glossy surface and clear permanent adhesive. The film is suitable for long and medium term exterior applications and long term interior applications. The UV stability of the colours and material when using solvent printing without lamination is 2 years outdoors. With lamination the durability increases to 5 years. The film has a thickness of 70 μ. The material is available in widths up to 160 cm.
Blue back side paper is a paper used for printing posters for billboard display. The blue back side covers the underlying motif so that it does not shine through and disturb the printed motif, as the posters are glued one over the other.Billboard posters are printed with solvent and UV printing technology is used for posters for closer viewing distance - higher resolution.
City light is a translucent white, waterproof paper for printing posters to be placed in illuminated displays of city furniture or other illuminated surfaces. We also use it to print larger series of posters for medium and smaller viewing distances for outdoor use. We print CLV paper primarily with UV printing technology, which has the best quality on its surface and a higher density for illumination than other technologies, while maintaining high resolution.
It is a white coated paper with a semi-matt surface, for printing posters to be placed in interiors, shops and shop windows. We use it for printing small and large series of posters for short viewing distance. We print poster paper mainly with mildsolvent printing technology, which has the best quality and the highest resolution so that the posters are closest to offset printing. Posters are inserted into frames or clamping rails. The difference between the two papers is the weight, so this paper is less transparent than the 135gsm variant.
This strong mesh fabric with medium fabric density and a thick coating on the fabric is suitable for mesh applications with the highest strength requirements, for large area applications that already meet the translucent requirements of perforated while offering a quality view from the inside of the application material. It is available up to a width of 500cm. The material has M2 and B1 certifications
